Specifications

PROGRAMMING THE REMOTE

TO CONTROL AN AUXILIARY

COMPONENT

Your remote can also control the brands of the equipment listed,

such as a radio, CD player, tape player, or phonograph. It is

already programmed to control some Proscan and RCA

amplifiers and audio/video receivers.

1. Turn on the component to be programmed.

2. Look up your component's code number on the code list.

3. Press and hold theAUX button.

4. Enter the 4-digit code from the code Fist on the next page.

5. Release the AUX button and press ON.OFF or CHAN up or

down to see if the auxiliary component responds to the

remote commands.

OPERATING THE AUXILIARY COMPONENT

After you have programmed your remote, see which buttons will

operate your component.

1. Point the remote at the component and press AUX. If it does

not turn on, press AUX and then ON.OFF.

2. You may want to experiment to see which buttons will

operate your component. Try pressing buttons, such as play,

REVERSE, and FORWARD.

AUX

REVERSE PLAy FORWARD

You'll use these buttons when you

program the remote to control an

auxiliary component.

Auxiliary Component Codes

Proscan/RCAJDimensia (only)

AMIFM 0003

Auxiliary Component 0004

Phono 0005

Tape I 0006

CD 0007

I This remote may not operate all 1

models of the brands that are

shown.