Specifications

ADD/REMOVE CHANNELS
Channel 115
is presently ADDED
Press CLEAR to remove
Press MENU to exit
ADD/REMOVE CHANNELS
Channel 115
is presently REMOVED
Press INFO to add
Press MENU to exit
Once you have reached your selection, the screen will tell
you if the channel is currently in your viewing list. Press
CLEAR to remove a channel. Press INFO to add a channel.
Once you are completed, you can press MENU to exit out of
the menus.
DisplayingTime and Date
Pressing the INFO button on the
remote control orVCR displays
the time and date on screen
temporarily.
TIME AND DATE
The VCR gives you two ways to set the time and date; manually
or by using the Auto Clock feature. Using Auto Clock enables
the VCR to update the clock each time you turn off the VCR.
The Auto Clock feature is advantageous because it updates the
time for you automatically.
AUTO CLOCK SET FEATURE
The Auto Clock feature is set to ON by default at the factory. In
the ON setting, the VCR looks for a channel carrying AIISet time
data and updates the clock using the Coordinated Universal
Time. There are certain steps which are required, such as Auto
Channel Search, setting the Time Zone, and setting the Daylight-
Savings feature, before the Auto Clock feature works.
SETTING THE TIME ZONE
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to display the TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set: ON
L
4 Set Daylight Savings
0 Exit
3. Press3 to displaythe SET TIME ZONE screen.
Auto Clock Info
With a cable box, theVCR will not
reset the clock after a power
outage unless the cable box is set
to the channel carrying the
broadcast signal.
If Auto Clock Set is unsuccessful,
try tuning theVCR (or cable box)
to a channel carrying AIISet time
information (usually PBS),then
turn theVCR off. If the time does
not set within I0 minutes, set the
time and date manually through
theTime menu.
Check local cable system orTV
stations for availability of channels
with AIISet information.
14