Specifications

SETUP FOR A DIGITAL
SATELLITE RECEIVER
With this setup, the VCR turns on an RCA, Proscan, or GE
satellite receiver antenna and tunes it to the desired channel at
the start time of a timer recording. For other brands, the VCR
tunes the receiver to the desired channel only if the receiver is
turned on. Position the satellite receiver above the VCR as
shown in the Connections section.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
I VCR Plus+
2 Timer Recordings
3 Time
5 Setup
6 Preferences
7 Audio
8 Language
O Exit
2. Press 4 to display CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 AddlRemove Channels
3 Signal Type: CABL{
4 VCR Plus+ Setup
5 CabLe Box Setup
I
0 Exit
3. Press 6 to select the SAT SETUP menu.
4,
SAT SETUP
On what channel does
the VCR receive signals
from the SAT receiver?
Enter 01-13 or INPUT
Press MENU to cancel
Enter the output channel of your satellite receiver, usually
03, 04, or video line input and press MENU. The VCR
confirms that it receives all satellite signals on the specified
channel.
IContinaes on next parle)
9