User`s manual

50
Menus and Features
Editor
You may customize the channel listing by enabling or disabling the
display of certain channels. For instance, you may disable channels
that you never watch. You can restore disabled channels at a later
point in time.
1. Press GUIDE to bring up the GUIDE Plus+ system.
2. Press MENU to highlight the Menu bar.
3. Use the right and left arrows to highlight the Editor menu
selection.
4. Use the up and down arrows to select a channel.
Then use the Editor Menu Action Buttons as described in the next
section.
Editor Menu Action Buttons
While browsing the Editor menu, the following Action buttons are
available on the bar:
• Cancel Press 1 on the remote to cancel any changes made since
entering the Editor Menu.
• Change Press 2 on the remote to change the channel number for
the highlighted channel line.
• On/Off Press 3 on the remote to toggle the state of the channel
between On and Off.
SETUP
The Setup Menu lets you access GUIDE Plus+ System setup
information. To access the Setup option:
1. Press MENU on the remote to highlight the Menu bar.
2. Use the arrows to highlight Setup.
3. Use the up and down arrows to select Setup, View Demo, or
Options:
• Setup Displays the GUIDE Plus Gold System setup screens.
Setting up the GUIDE Plus+ Gold System is detailed in the
Setting Up section of this book.
• View Demo Runs the GUIDE Plus+ Gold System
demonstration.
• Options Displays the GUIDE Plus+ Gold autodisplay options.
On Automatically displays the GUIDE Plus+ Gold System
when you use the TV button on the remote to turn on
the monitor.
Off Disables the GUIDE Plus+ Gold System from being
displayed when you use the TV button on the remote to
turn on the monitor.
Ad/Show Information
Troubleshooting
Troubles sometimes are caused by simple
“faults” that you can correct without a
service technician. Here are a few basic
remedies:
Program information does not download
• Review your setup information and
make sure it is correct.
• The monitor must be off to download
information. Leave your monitor off
overnight, for at least 10 hours, to
receive a download for your area.
• If you are using a cable box, make
sure the cable box is on in order to
receive program information.
• If you are using a VCR, make sure the
VCR is off in order to receive program
information.
Scheduled Watch or Record does not
occur
• Check Schedule for timer conflicts.
• Check that G-LINK cable wand is
positioned correctly.
• Make sure there is a tape in the VCR
and that the G-LINK wand is properly
positioned and the VCR is off.