User`s manual
48
Menus and Features
Schedule
The Schedule menu lets you create timers for either viewing or
recording programs. The GUIDE Plus+ Gold System allows one-button
recording if you have positioned the G-LINK cable wand in front of
your VCR. See the
Setting Up
section of this manual
for more details on
positioning the G-LINK cable.
To schedule a program to watch or record:
1. Press GUIDE to bring up the GUIDE Plus+ Gold System.
2. Highlight a program within the Channel listing.
3. Select Watch or Record from the Action buttons bar. The timer is
then automatically logged into the Schedule menu.
4. If you select Record, make sure to place a blank tape in the VCR
and leave the VCR off.
The program information window will display a confirmation when
you have successfully created a timer to watch or record.
To remove or change the frequency (daily, once, or weekly) of a
scheduled event, access the Schedule Menu from the Menu bar.
1. Press GUIDE to bring up the GUIDE Plus+ System.
2. Press MENU to highlight the Menu bar.
3. Use the arrows to highlight the
Schedule
menu selection.
4. Use the up and down arrows to highlight the program you want to
edit. Then use the Schedule Menu Action Buttons as described in
the next section.
Schedule Menu Action Buttons
When viewing the Schedule menu the following Action buttons will
appear on the bar:
• Remove Highlight the Watch or Record timer you wish to remove
from the schedule and press 1 on the remote.
• Change Highlight the Watch or Record timer you wish to change
and press 3 on the remote to toggle the frequency between the
following choices:
DAILY
records the same program each day Monday through
Friday.
ONCE
records only on that day.
WEEKLY
records the program each week at the same time.
Messages
Menu
Selection
Messages
Action Buttons
Schedule
Menu
Selection
Schedule Menu
Action Buttons
If you have selected two programs to
watch or record which begin at the same
time or overlap, you will receive a time
conflict message. The GUIDE Plus+ Gold
system will not schedule a conflicting
timer, therefore you must choose
between the two programs.