User`s manual

Menus and Features
31
MAIN MENU
1 Audio...
2 Picture Quality...
3 Screen...
4 Channel...
5 Set Time...
6 Parental Controls...
7 GUIDE Plus+ Menu...
0 Go Back
CHANNEL
1 Signal Type...
2
Auto Channel Search
3 List and Labels...
4 Autotuning...
0 Go Back
CHANNEL MENU
Signal Type Displays a choice list that lets you select the current
antenna type. Note that if you have set up the GUIDE Plus+ System,
Signal Type does not appear in the Channel menu.
UHF/VHF Antenna Choose this if you are currently using an off-
air antenna for TV signals.
Cable TV Choose this if you are currently using cable or a cable
box for TV signals.
Auto Channel Search Tells the monitor to search automatically for all
the channels available through the antenna input. When the monitor
finds an active channel, it places it in the channel list; inactive
channels (weak stations or channels with no signal at all) will be
removed from the channel list. Video Input channels can also be added
later in the List and Labels control panel. Note that if you have set up
the GUIDE Plus+ System and specified that you are using a cable box,
Auto Channel Search does not appear in the Channel menu.
List and Labels Displays a control panel that lets you custom-build
your channel list and choose a six-character label for up to 45
channels. Follow the on-screen directions to enter your channels and
other information.
Channel Number Use the up and down arrows to scroll up and
down through the channel scan list. You can enter the channel
number directly using the number buttons.
Channel List Only the channels included in the Normal list are
available when you scan up and down using the CH buttons. Use
the up and down arrows to indicate whether the channel number
indicated is included ( Yes ) or is not included ( No ) in the Normal
channel list.
Channel Labels You can enter a six-character label for up to 45
channels. Use the CH ^ (channel up) or CH v (channel down)
buttons to change channels in the Channel Number field. This
works even if you’re not in the Channel Number field. Or, enter the
channel number directly using the number buttons on the universal
remote. To enter a number greater than 99, press and hold “1” to
enter the hundreds digit, release, then press the two remaining
numbers.
1. Use the left and right arrows to point to the three different
areas of the control panel (called “fields”).
2. Use the up and down arrows to scroll through the numbers (or
use the digit keys on the remote) and letters and select Yes or
No in the Channel List field. You may wish to refer to the TV
station call letters listed in your newspaper’s TV section for
ideas on labelling the channels.
3. Repeat this process for each of your channels. Then press
MENU or OK to continue. The monitor can store in memory as
many as 45 labels.
LIST AND LABELS
Channel Channel Channel
Number List Label
59 Yes FOX---
Use ^ or v, keypad, or CH ^/v
to set channel, OK to exit.