Specifications

Monitor Panel
SPEAKER
Exr
Vll_EO
INPUT SELECT
CAUTION
TO AVOID DAMAGE:
1. OO NOT COHNECT
SPEAKER OUTPUT
10 A S[PARATE
AMPLIFIER OR
LEFT AND RIGHT
SPEARER OUTPUTS
TOGLrTHER.
CABLE]ANTENNA
SPEAIff.RS
÷
R
HI-FI OUTAUDIO JACKS
SELECTOUTAUDIOJACKS
INPUT1AUDIO JACKS
EXTERNAL
SPEAKERTERMINALS
SPEAKERSWITCH
SELECTOUTVIDEOJACK
INPUT2 VIDEOJACK
INPUT 1VIDEOJACK
CABLE/ANTENNACONNECTORS
Q) HI-FIOUTAUDIOJACKSfeed volume-controlled stereo
audio out from whatever is displayed on the TV screen.
Allows connection of audio amplifier so you can adjust
sound level with TV's remote.. Connection. details are
on page 44. •
@@
SELECTOUTJACKSprovide fixed level audio and video
output from whatever is.diSPlayed on the TV screen
(except signal from S-VIDEO.connector). Provide standard
audio and video signals suitable for recording. Can be
used for several applications such as: "
• VCR editing with two or three VCRs (page 42).
• Recording TV programs onto a camcorder (page 43).
• Recording cable-TV programs onto a VCR that is not
cable compatible (page 42).
• Recording audio onto an audio cassette tape recorder
(page 44).
Notes: Remember that the signal _oming out of these jacks is
whatever you see (and/or hear) on the TV screen. So, whatever
yo u want to record must be displayed on the TV screen during
recording• The small inset picture• from the picture-in-picture
feature and any menus (video, audio, or setup) or displays such as
clock and channel that are on the screen can not be recorded.
To record from an S-VHS component connected to the S-VIDEO
connector, you must also connect the video cable to the VOOEO
INPUT1 jack and then select channel 91on the TV screen.
34