Specifications

Cable Box Channel Setup

The CABLECHANfunction lets you program to which channel

the TV will automatically tune when you press the

DSS.CABLEbutton on the remote. This is handy if you have

to connect a cable box to your TV. You will no longer

have to remember the output channel of the cable box

because the TV will remember for you.

For example, if you connect a cable box to the TV's

CABLE/ANTENNA connector (as shown on page 35), you will

no longer have to remember to select channel 2, 3, or 4 on

the TV to see what's coming from the cable box. By

entering the cable box's output channel (usually 02, 03, or

04) next to the CABLECHANfunction, the TV will

automatically tune to that channel each time you press the

CABLEbutton on the remote.

This function is especially convenient if you have a

remote-controllable cable box that can be operated by the

DSS-ABLEbutton on the remote as described on page 39.

Pressing the DSS.CABLEbutton will then not only switch the

remote to cable mode but will also automatically tune the

TV to the proper channel for viewing the picture from the

cable box.

Setting Up Cable Box Channel

with or withoutremote

1 Repeatedly press the MENUbutton to select SETUPMENUand

then press + to display the setup functions.

2 Repeatedly press MENUto select the CABLECHANfunction.

Enter the channel number you want to program by pressing

two digit buttons on the remote control. (The channel

number you enter is the channel to which the TV will tune

automatically when you later press the CABLEbutton on the

remote). The TV will change to the channel you select. This

will help you to confirm that it is indeed the channel you

want the TV to automatically tune. Most cable boxes output

their signals on either channel 02, 03, or 04.

4 Press the + button to program the channel number you

selected into the CABLE CHAN function memory.

Note: Pressing the - button here will turn off this feature and

display CABLECHAN:OFF again.