CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could avoid the users’ authority to operate this equipment. CAUTION: The monitor shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the Monitor CAUTION: Do Not Place This TV on an Unstable cart, stand, or table. The TV may fall, causing serious injury to a child or adult, and serious damage to the TV.
WARNING: TO REDUCE THE RISK OF FIRE OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
3 HEED ALL WARNINGS 4 FOLLOW ALL INSTRUCTIONS 5 DO NOT USE THIS APPARATUS NEAR TABLE SPECIFIED BY THE MANUFACTURER, OR SOLD WATER WITH THE APPARATUS. WHEN A CART IS USED, USE BY THE MANUFACTURER. 12. USE ONLY WITH CART, STAND, TRIPOD, BRACKET, OR Do not use this TV near water. For example, do not uses near CAUTION WHEN MOVING THE CART/ a bathtub, washbowl, kitchen sink or laundry tub, in a wet APPARATUS COMBINATION TO AVOID INJURY FROM TIP-OVER. basement, or near a swimming pool, and the like.
CLEANING AND MAINTENANCE The front of the display panel has been evenly with a dry cloth, of the same type, until the specially treated. Wipe the panel surface gently surface is dry. using only a cleaning cloth or a soft, lint-free Do not scratch or hit the surface of the panel with cloth. fingernails or other hard objects. Furthermore, avoid If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent solution and then wring the cloth to remove excess liquid.
TABLE OF CONTENTS CAUTION AND WARNING…………………………………………………………………..1 IMPORTANT SAFTY INSTRUCTIONS……………………………………………….…….3 CLEANING AND MAINTENANCE………………………………………………………….4 DEAR PROSCAN CUSTOMER……………………………………………………………..5 SAFETY PRECAUTIONS…………………………………………………………………….8 Set up………………………………………………………………………….………………………………….…………..8 AC Power Supply Cord ……………………………………………………….……………………………….…………...8 If Problems Occur During Use …………………………………………………………………………….……….………8 When using the TV set……………………………………………………………………………………….
Tuning Band…………………………………………………………………………..….………………….……..….….…20 DTV-Signal……………………………………………………………………………..……………….…...….……………20 Auto Ch Search………………………………………………………………………..…………….……...……..…..….…20 Add On Ch Search………………………………………………………………………..…………………….….…..……20 Manual Ch Set………………………………………………………………………………..……….…..….….…….……20 Channel Labels…………………………………………………………………………………..….……...….……………20 Manual Language……………………………………………………………………………….…………..………………21 Reset …………………………………………………………………………………………….……….….
SAFETY PRECAUTIONS WARNING KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY SWALLOWED. ALSO, BE CAREFUL ABOUT PACKAGING MATERIALS AND PLASTIC SHEETS. Set up Do not place the TV set on sloped or unstable surfaces. The TV set may fall off or tip over. Do not place any objects on top of the TV set. If water spills onto the TV set or foreign objects get inside it, short-circuiting may occur which could result in fire or electric shock.
When using the TV set Do not bring your hands, face or objects close to the ventilation holes of the TV set. Top of the TV set is usually very hot due to the high temperature of exhaust air being released through the Ventilation holes. Burns or personal injuries can happen if any body parts are brought too close. Placing any object near the top of the TV could also result in heat damage to the object as well as to the TV if its ventilation holes are blocked.
FRONT PANEL Familiarizing Yourself with the Main Hardware < Checking the front panel > (The picture of the product may vary depending on the model) a. Selecting exterior signal input. b. Main Menu display and menu selecting confirm c. Channel decrease d. Channel increase e. Volume decrease f. Volume increase g.
REAR PANEL Rear panel (The picture of the product may vary depending on the model) A. 100-240V AC 50/60Hz Power Input Terminal. L. CVBS Input Terminal B. Ypbpr1 right channel input Terminal. M. S-Video-com Input Terminal. C. Ypbpr2 right channel input Terminal. N. COAX -Digital Audio Out D. Video right channel input Terminal. O. Connect with antenna or cable TV to watch TV E. Y2 video-com input Terminal F. Pb2 video-com input Terminal. B1. Ypbpr1 left channel input Terminal G.
LEARNING ABOUT REMOTE CONTROL 1. POWER Power on/off 2. SLEEP Press to select a preset time interval to automatically shut the TV 3. ASPECT Press to adjust the screen size. 4. DISPLAY Check your current mode. 5. INPUT Display a menu of all available input sources, Also used to confirm your choice in the on-screen menu. 6. MTS Press to select your favorite language for digital broadcasting; you can select your favorite mode Mono/Stereo/SAP 7. FAV. Watch your favorite channels 8. FAV.
19. EPG One of signal channel EPG or Multi channel EPG 20. DTV Press to change between Analog TV and Digital TV 21. CC Press to select Caption 22. MENU Press to display the main on-screen menu. 23. UP/DOWN/LEFT/RIGHT Press to select on-screen menu items and change menu values. 24. ENTER Press to enter the menu. REMOTE CONTROL INSTRUCTIONS < Inserting the batteries into the remote control >1.Push the back of the remote control and pull forward slightly.2.Insert two AAA 1.
Are the batteries worn out? Was there an AC power failure? Is the power cable plugged in? Is any special fluorescent or neon sign board turned on? < Remote Control Reception Angle> Use the Remote control within a range of 7~10m and at an angle of 30° to either side of the receiver. Caution-Used batteries should be recycled and kept out of children's reach.-Do NOT use new and old batteries together. Change both batteries at the same time.
Cable TV network 1 Use a coaxial cable to connect the rear panel of the TV's [AIR] or [CABLE] terminals and the wall mount or external 2 When an Air signal is required, connect to the [AIR] terminal. If a Cable signal is required, connect to the antenna. [CABLE] terminal. If both Air, Cable is available, and then connects both [AIR] and [CABLE] terminals. 3 Connect the TV power cord when connecting everything else. < Caution > Avoid bending the copper tip at the center of the coaxial cable.
λ Press MENU to display the main menu. λ Press λ Use λ Press ENTER button to select your desired language. repeatedly to select the SETUP MENU. / / and / to select MENU LANGUAGE. VOLUME ADJUSTMENT 1. Press VOL+/- to adjust the volume. 2. If you want to switch the sound OFF, press the MUTE 3. You can cancel this function by pressing MUTE or VOL+ ADJUST THE OSD SCREEN Press the MENU button to display the main menu. Use / / / buttons to select and adjust the available menus.
NOTE: The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation. CHOOSING A TV CHANNEL 1. 2. Using the CH / CH on the front panel or on the remote control. λ Press CH to increase channel number. λ Press CH to decrease channel number. Using 0-9 digital buttons and -/-- button You can select the channel number by pressing 0 to 9 or -/--. 3. Example: To select 1-digit channel (e.g. Channel 5): Press the 5 button.
SELECTING INPUT SOURCE You can select the input source by pressing the INPUT on the remote control or on the front panel. PICTURE MENU OPTIONS NOTE: In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example to help the TV operation. Press the MENU on the front panel or on the remote control and then use / 1. Use / to select what you want to adjust in the PICTURE MODE. 2. Press ENTER button to adjust. 3. When you are satisfied with your adjustment.
Picture Mode Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in PICTURE menu. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast Press ENTER button to select it and then use / to adjust the contrast of picture. / to adjust the brightness of picture. / to adjust the sharpness level of picture.
You may select the sound mode directly by pressing the SOUND button on the remote control. Audio Language Press ENTER to one of the audio language such as English/ French and Spain, but the condition is that the program system has included the language code. Bass Press ENTER button to select it and then use / to increase or decrease the level of the lower-pitched sounds. / to increase or decrease the level of the higher-pitched sounds. / to adjust the audio output between left and right speakers.
DTV-Signal In DTV mode, you can tune manually and adjust the angle. Orientation of the antenna etc. Auto Ch Search Press / to move the cursor to the item to be selected (item selected highlighted in yellow). Press ENTER key to enter your selection and scan. After the scan is finished, the following menu will display.
Reset Press ENTER to retune to the factory setting. FEATURE MENU OPTIONS / Press MENU on the front panel or on the remote control and then use / to select the FEATURE menu to select what you want to adjust in the FEATURE menu. 1. Use 2. Press ENTER button to select it and then use 3. When you are satisfied with your adjustment, press MENU to exit the main menu.
Noise Reduction- Spatial: press Noise Reduction -Speaker :press / to select on or off. Noise Reduction-Temporal: press / to select on or off. Auto Contrast Enhancement: press Color Temperature: press 3D Y/C: press / to select on or off. to select on or off. to select one of Normal/ Cool and Warm. to select on or off. Dynamic Contrast: press Setting Reset: press / / / / / to select on or off. to retune to the factory setting.
MAPP Press ENTER to lock or unlock one of None/ G/ PG/ PG-13/ R/ NC-17 and X None – No restrictions G – General Audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations. PG – Children under 13 should be accompanied by an adult. PG-13 – Parental guidance suggested. Children under 13 should be accompanied by an adult. R – Restricted. Viewers should be 17 or older. NC-17 – not classified. Viewers should be 17 or older.
Canadian English Press ENTER to lock or unlock one of E/ C/ C8+/ G/ PG/ 14+/ 18+. E – Expect No restriction. C – Children C8+ - Viewers should be 8 or order. G – General Audience. PG – Parental guidance suggested. Children under. 14+ - Restricted. Viewers should be 14 or older. 18+ - Restricted. Viewers should be 18 or older. Canadian French Press ENTER to lock or unlock one of E/ G/ 8 ans+/ 13 ans+/ 16 ans+ and 18 ans+. E – Expect No restriction. G – For all. 8 ans+ - Restricted.
VGA MENU OPTIONS Press MENU on the front panel or on the remote control and then use / to select the Feature menu in VGA mode. / to select what you want to adjust in the FEATURE menu. 1. Use 2. Press ENTER button to select it and then use 3. When you are satisfied with your adjustment, press MENU to exit the main menu.
size also will change. Position- This function is to adjust the picture to Left/ Right and Up/ Down as you prefer. Auto Adjust Press ENTER button to select it and then use / to do auto adjust that automatically adjusts the available options for the best viewing configuration. Setting Press ENTER to do preset that can retune to the factory setting. YPBPR MENU OPTIONS Press MENU on the front panel or on the remote control and then use / to select the Feature menu in Ypbpr mode. 1.
HDMI MENU OPTIONS Press MENU on the front panel or on the remote control and then use / to select the Feature menu in HDMI mode. Time Set Press / button and then use ENTER the time set menu that allows you to set the time the TV will display. Sleep timer Press ENTER button to select it and then use / to adjust the amount of time before your TV turn off automatically and press the ENTER that can select the 30min/ 60min/ 90min and OFF. Advance Video Menu Press ENTER to enter the advance video menu.
Check the polarity of the batteries. Check the angle of the remote control from the product or if there are any obstacles between the remote control and the product. Check if you have pressed the correct key for the correct option. Try to a bright light position near TV's which transmit a strong light source on TV window. λ I cannot change channels with the remote control. Press [TV/AV] and select .
Check if the program is in stereo. Stereo may not work well in areas with bad reception. Try using Mono for these areas. λ Sound is malfunctioning while using a cable. Check your sound connecting cable. Check if other channels also have no sound I can see images, but there is no sound. Press the volume buttons to increase the sound. Try watching a video (if the video has sound, check your cable company). If there is no problem with the cable receiver, then call our customer service.
