Instructions / Assembly

Page 17 of 25
Guy Band Coupler Support
Part ID - 2SVSGBS_ _
Fig. 6
Floor / Base Support
Part ID - 2SVSFBS_ _
Center the Floor / Base Support under the
Vertical Tee making the necessary height
adjustment to maintain the proper slope of the
vent system.
CAUTION!
Installer is to allow sufficient space below
the Floor / Base Support to properly install
the Drain tube with prescribed P-Trap
configuration. (See page 11)
Tighten the lock-nuts onto the bolts that
clamp the assembly onto the pipe to a torque
specification of 70 in/lbs / 6 ft-lbs / 8 Nm.
This guy band coupler can be used in the
vertical & horizontal orientation providing
additional rigidity & support when in final
position (guy wires by others).