Datasheet

PEG
SIDE PLATE
BACK PLATE
PEG
KNOB
RECESS MOUNT
PANEL
42.3
73.9
TO REMOVE KNOB
Rotate the knob to the off position, The knob is still locked to the switch.
Depress and continue to rotate anticlockwise until the stop is reached.
The knob can now be removed.
TO REPLACE KNOB
Place knob in the switch housing. Depress and turn clockwise 45º to the
off position.
Note: The back and side panels are removable to allow access for cable
and links.
Two pegs are supplied for fastening to other 700 series products
NB// As this switch is rated for 1.8m (6ft) immersion no solvents or sealers
are to be used.
A petroleum-based grease can be used on the lug-stud join.