User Guide

ProPlex FloppyDrive Digital DIN Quick Start Guide, v1.2 14 June 2021 3
2. Connect the DMX signal input to the DMX input located in the right top corner of
the unit. The connector should be wired as follows:
2.1 To pass DMX to another device, connect the DMX cable to the DMX Thru port
located in the right top corner of the unit. The connector should be wired as follows:
3. Connect the FloppyFlex Digital to the output connector of the FloppyDrive Digital
DIN Rail.
The connectors should be wired as follows: