User Manual

WINDOWS INSTALLATION

Installing ReCycle

1. On the CD-ROM, double click the icon named “Install ReCycle“.

2. Follow the instructions in the dialog boxes that appear.

You will have the option to launch ReCycle directly when exiting the installer.

Don’t launch ReCycle yet! You need to perform some additional

steps first:

Read the Read Me file!

In the ReCycle folder that was created on your hard disk during installation, you

may find a Read Me file. This will contain any late-breaking updates that didn’t

make it into the manual. Please double click on it and read it before proceeding.

Please fill out and send in the registration card that comes in this package. Do-

ing so will make sure you are entitled to technical support and kept aware of up-

dates and other news regarding ReCycle.

Launching ReCycle

1. Locate the ReCycle entry on the Start menu and select it.

2. The program prompts you to insert the ReCycle CD-ROM (if not al-

ready in the drive).

This is only required the first time you run the program.

3. A dialog box appears, asking you to enter your name, company and

serial number. Do so, and click OK.

The serial number is printed on the Registration Card which is included in

the ReCycle package. Again, this procedure is only required the first time

you run the program.

4. Finally, an Open dialog appears, asking you to locate an audio file

for opening.

This is the same dialog that appears when you select “Open” in the program

(see page 26).