Specifications

INTRODUCTION TO THE COMBINATOR
74
If you flip the rack around, the Combi outputs have been auto-routed to inputs on
the mixer device, but as the Combi is currently empty there are no connections
to the “From Devices” inputs yet.
Let’s continue by adding a Line Mixer to the Combi.
4. Click in the empty space at the bottom of the Combinator so that a
red line appears.
This is called the insertion line. When this line is shown, the Combinator will
be the target destination for new created devices.
The insertion line.
5. Select a Line Mixer 6:2 device from the Create menu.
The mixer is added to the Combi. The master output of the Line mixer is auto-
routed to the “From Devices” connectors.
Now we have a good starting point for adding instrument devices - the added in-
struments will be auto-routed to the Line mixer device in the Combi.
For sake of example, let’s make a simple layered instrument Combi using two in-
strument devices; a NN-XT and a Malström.
6. Select the Line mixer by clicking it in the Combinator rack, or click
in the empty space at the bottom of the Combinator so that the in-
sertion line appears.
Either method will ensure that the next device created will be added to the
Combi.