Specifications

SETTING UP
18
3. At the middle of this page, there is a section entitled “Default
Song”.
You have three choices: “Empty Rack”, Built In” and “Custom”.
Select which one you want to use by clicking the corresponding radio but-
ton.
• Empty Rack - This is an empty rack. Well, almost empty, since it contains the
Reason hardware interface.
• Built In - When this is selected, launching Reason will open a basic demo
song. Selecting “New” from the File menu will open a template song with a
few devices to start with, but no sequencer data.
Note that it is not possible to open these songs by regular means - via the
browser - since they are not “independent”.rns-files, and thus do not reside
anywhere in the Reason folder.
• Custom - This allows you to select a custom default song. Any Reason song
can be used, so if you often create songs using the same or similar device
setups, you can use a previously created song as the default song. This way,
all new songs you create will have the same device setup.
D To select a custom default song, click the Folder icon to the right
and browse to the desired Reason song.
The name of the selected song will then be displayed in the text box.