Specifications

USING
20
Adjusting input levels
Adjusting the input levels on the Propellerhead Balance audio interface is easy. The Input Level knobs move in
distinct steps which makes it very easy to set the same level on both inputs in a stereo recording situation. The main
thing to keep in mind when setting input levels is to refrain the signal from clipping.
In this example we have connected an electric guitar to the GUITAR LEFT input of the Propellerhead Balance audio
interface.
1. Select desired input signal by pressing the corresponding Input Selector button.
The LED on the selected input button lights up.
Selecting the GUITAR 1/Left input as source
2. Play the connected instrument and adjust the Input Level 1 knob upwards (clockwise).
A detected input signal is indicated by a green Signal/Clip LED:
Input signal present on the GUITAR 1/Left input
3. Turn up the Input Level knob until the Signal/Clip LED turns red.
A red Signal/Clip LED indicates that the input signal is too loud and that the signal clips:
Clipping signal present on the GUITAR 1/Left input
GUITAR 1/Left