Specifications

USING
18
Connecting instruments
Connecting an electric guitar or electric bass
1. Connect your electric guitar/bass to one of the 1/4” jacks marked ‘GUITAR’.
These jacks are designed especially for use with passive electric guitar/bass signals and are unbalanced.
Connecting an electric guitar to one of the GUITAR inputs
! If your electric guitar/bass use active electronics (e.g. powered by an internal battery) it could be a good idea
to activate the Pad switch for the corresponding GUITAR input. This will attenuate the input signal level to
better adapt it to the input specifications.
Connecting an active electric guitar and activating the Pad for the GUITAR LEFT input
2. Press the appropriate GUITAR button on the front panel and adjust the input signal level by turning the
corresponding Input Level knob (see “Adjusting input levels”).
Selecting Input source and adjusting input level
Pad
switch
GUITAR 1/Left
GUITAR 2/Right
Channel 1/L
input level
Channel 2/R
input level