Specifications

ROUTING AUDIO AND CV
38
Bypassing Auto-Routing
D If you wish to create a new device, without any auto-routing taking
place, press [Shift] when creating the device.
Manual Routing
By selecting “Toggle Rack Front/Rear” from the Options menu or pressing [Tab]
you turn the rack around. On the back of each device you will find connectors of
two different types: audio and CV. As mentioned before, audio inputs and out-
puts are shown as large “quarter inch” jacks, while CV input and output jacks
are smaller.
There are two ways to route audio from one device to another:
• By connecting “virtual patch cables” between inputs and outputs.
• By selecting connections from a pop-up menu.
Using Cables
! For the cables to be visible, the option “Show Cables” must be acti-
vated on the Options menu. See below.
1. Click on the desired input or output jack on one of the devices, and
drag the pointer away from the jack (with the mouse button
pressed).
A loose cable appears.
2. Drag the cable to the jack on the other device.
When you move the cable end over a jack of the correct type (audio/CV, in-
put/output) it will be highlighted to show that a connection is possible.
3. Release the mouse button.
The cable is connected. If both input and output are in stereo and you con-
nect the left channels, a cable for the right channel is automatically added.
D You can change an existing connection in the same way, by clicking
on one end of the cable and dragging it to another connector.
Using pop-up menus
1. Click (or right-click) on a connector.
A pop-up menu appears, listing all devices in the rack.
2. Move the pointer to the desired device (the device to which you
want to create a connection).
A submenu appears, listing all suitable input/output connections. For exam-
ple, if you clicked on an audio output on a device, the hierarchical submenus
will list all audio inputs in all other devices.
D If a device is greyed out on the pop-up menu, there are no connec-
tions of the suitable kind.
3. Select the desired connector from the submenu.
The connection is created.
Disconnecting Devices
Again, there are two ways to disconnect devices:
D Click on one end of the cable, drag it away from the jack and drop it
anywhere away from a jack.
or
D Click on one of the connectors and select “Disconnect” from the
context menu that appears.