Operation Manual

SEQUENCER FUNCTIONS
88
! Note that you can select different Snap values for selected clips and for open clips (see “About separate Snap
values for selected clips and for open clips”).
The Snap function effects the following operations:
• Moving the Song Position Pointer, Loop Locators and Song End Marker.
When you adjust the Locators with Snap activated, they will snap to the selected Snap value on an absolute grid.
• Moving clips and events.
When you move objects with Snap activated, they will keep their relative distance to the Snap value positions.
• Drawing clips.
When you create clips with the Pencil tool, their start and end positions will snap to the selected note value posi-
tions on an absolute grid.
• Drawing events in open clips.
The Snap value determines the absolute grid points on which you can draw a note or an automation point. The
Snap value also determines the shortest possible note length that you can draw.
• Splitting clips with the Razor tool.
The Snap value determines the absolute grid to which a clip can be split.
• Nudging clips, events and recording.
When you nudge clips, events or recordings with Snap activated, they will keep their relative distance to the Snap
value positions.
About separate Snap values for selected clips and for open clips
There are two different Snap settings, one for when a clip is open for editing in Edit Mode, and one for when no clip
is open (e.g. in Song/Blocks View). Typically, you would set a fine Snap value (e.g. 1/16) for open clips in Edit Mode
and have the other Snap value set to “Bar” for convenient clip arranging in the Song/Blocks View. You can also
choose to turn Snap off in either of these modes, independently of the other setting.
• The Snap value for editing is used whenever a note clip or automation clip is open (including when an automa-
tion clip is opened in Arrange Mode).
However, there’s one exception: If a note clip is open in Edit Mode and you click in the Clip Overview (see “Edit
Mode elements”), the clip will remain open but the Snap value for arranging will be selected. This allows you to e.g.
move or resize the clip in the Clip Overview just like in the Song/Blocks View, without closing it first.
Sequencer Toolbar keyboard shortcuts
Below is a complete list of the computer keyboard shortcuts for selecting tools on the sequencer Toolbar:
|
Function
|
Key command
Selection tool select [Q]
Pencil tool select [W]
Eraser tool select [E]
Razor tool select [R]
Mute tool select [T]
Magnifying Glass tool select [Y]
Hand tool select [U]
Snap On/Off [S]