Operation Manual

SEQUENCER FUNCTIONS
83
Moving note lanes
A note lane has a “handle” and can be moved vertically together with all clips on the lane. Move a note lane to another
position on the same track like this:
1. Click on the lane handle (the leftmost area of the lane).
2. Drag the note lane up or down and release at the desired destination.
Just as when moving tracks, a red insertion line is shown indicating where the note lane will be placed after you re-
lease the mouse button.
• It is also possible to move note lanes, with their clips, between tracks.
! Parameter automation lanes and pattern lanes cannot be moved since they are tightly connected with their as-
sociated devices However, you can move or copy clips from one lane to another.
Copying (duplicating) note lanes
You can copy (duplicate) one note lane at a time, together with its clips, by doing the following:
1. While pressing [Ctrl](Win) or [Option](Mac), click and drag a copy of the note lane to the desired destination.
The cursor gets a + sign next to it to indicate duplication. The destination of the duplicated note lane could be the
same track or another track.
2. Release the mouse button.
! Parameter automation lanes and pattern lanes cannot be duplicated.
Muting lanes
Muting a note lane
D To mute a note lane, click its “M” (Mute) button.
The note lane “M” (Mute) button
Muting a parameter automation lane
D To mute a parameter automation lane, click its “On” button so that it goes dark.
The parameter automation lane “On” button