Operation Manual

SEQUENCER FUNCTIONS
80
Alternatively, if you want to automate several parameters in one go:
1. Select “Parameter Automation” from the Edit menu or the context menu.
The Track Parameter Automation dialog opens up.
D If the parameters you want to automate aren’t visible in the dialog, uncheck the “Show Frequently Used Only”
box to view all available device parameters that can be automated.
2. Place a tick in the boxes for the parameters you want to automate and click OK.
3. One parameter automation lane for each of the selected parameters will show up on the track.
The automated parameters on the device in the rack will get green borders, indicating that they have been auto-
mated.
Creating a pattern lane
For pattern based devices such as the Redrum Drum Module and Matrix Analog Pattern Sequencer, a single pattern
lane can be created on a selected track. Do either of the following:
D Click the “Create Pattern Lane” button at the top right of the Track List.
D Select “Create Pattern Lane” from the Edit menu or from the context menu.
D Hold down [Alt](Win) or [Option](Mac) and click on the “Pattern” button section of the device in the rack.
D Right-click (Win) or [Ctrl]-click (Mac) on the “Pattern” button section of the device in the rack and select “Edit
Automation” from the context menu.
When you create a pattern lane, the bank buttons on the device in the rack get a green border to indicate that they
have been automated.
D Clicking the Pattern and/or Bank buttons on the device during recording will automatically create a pattern
lane. See “Recording pattern automation” for more details.