Operation Manual

SEQUENCER FUNCTIONS
79
D Click on the “New Dub” button on the Transport Panel.
A new note lane will be created and automatically record enabled. See “Recording notes using the “Dub” and “Alt”
functions” for more details.
D Click on the “New Alt” button on the Transport Panel.
A new note lane will be created and automatically record enabled. At the same time, the previous note lane, or (if
loop is activated and the Song Position Pointer is between the Left and Right Locators) the clips between the Left
and Right Locators, will be muted. See “Recording notes using the “Dub” and “Alt” functions” for more details.
q Note that the “New Dub” and “New Alt” functions can also be used on-the-fly during recording without stop-
ping the sequencer.
Creating/adding parameter automation lanes
Parameter automation lanes can be created for all track types.
• During recording of a track, changing any parameter values on the device/channels strip will automatically cre-
ate a new parameter automation lane for each unique parameter. See “Recording parameter automation” for
more details.
Do as follows to manually create a parameter automation lane on a selected track:
D Hold down [Alt](Win) or [Option](Mac) and click on a device parameter in the rack. Alternatively, select “Edit
Automation” from the parameter’s context menu.
A new parameter automation lane will be automatically created in the track for the corresponding device or chan-
nel strip. The automated parameter on the device in the rack will get a green border, indicating that it has been au-
tomated.
! Note that if a track hasn’t already been created for the device, it will be automatically created during this oper-
ation.
Other ways of creating/adding a parameter automation lane are as follows:
1. Click on the “Track Parameter Automation” drop-down list at the top of the Track List.
2. Select the parameter you want to automate from the list.
A new parameter automation lane is automatically created on the selected track.
If you click the Track Parameter Automation drop-down list again, any selected parameters will have a symbol to
the left of the parameter name, indicating that an automation lane already exists for the parameter.
The automated parameters on the device in the rack will get green borders, indicating that they have been auto-
mated.