Operation Manual

MENU AND DIALOG REFERENCE
759
Quantize Notes
In Reason, you use the Quantize function in the following way:
1. Select the notes you want to quantize.
You can select notes inside an open note clips, or one or several closed note clips (to quantize all notes within the
clips). Selecting one or several tracks will quantize all notes in all clips on all note lanes on these tracks.
2. Bring up the Tool window and select the Sequencer Tools tab.
3. Set the quantize value (the Value pop-up menu in the Quantize section).
This determines to which note values the notes will be moved when you quantize. For example, if you select 1/16,
all notes will be moved to (or closer to) the closest sixteenth note position.
4. Select a value from the Amount pop-up menu.
This is a percentage, governing how much each note should be moved. If you select 100%, notes will be moved all
the way to the closest Quantize value positions; if you select 50%, notes will be moved half-way, etc.
5. If you like, you can make the quantization less exact by adding a Random value.
This is a random deviation range in ticks. If this is set to 10, the quantized notes will be randomly distributed in a
range of +/- 10 ticks around the quantize value grid.
6. Click the Apply button, select “Quantize Notes” from the Edit menu or hold down [Ctrl](Win) or [Cmd](Mac)
and press [K].
The notes are quantized.
Edit Keyboard Control Mapping...
This menu command is available when Keyboard Control Edit Mode is selected. It will open a dialog where you can
assign a Keyboard Control for a selected parameter. See “Editing Keyboard Control” for more information.
Clear Keyboard Control Mapping
This menu command is available when Keyboard Control Edit Mode is selected. It will remove the Keyboard Control
mapping for a selected assigned parameter. See “Editing Keyboard Control” for more information.
Clear All Keyboard Control Mappings for Device
This menu command is available when Keyboard Control Edit Mode is selected. It removes all keyboard mapping you
have set up for the selected device. See “Editing Keyboard Control” for more information.
Edit Remote Override Mapping...
This menu command is available when Remote Override Edit Mode has been activated on the Options menu. It opens
a dialog where you can assign a Remote Override for the selected parameter. See “Remote Override mapping”.
Clear Remote Override Mapping
This menu command is available when Remote Override Edit Mode has been activated on the Options menu. It will
remove the Remote Override mapping for a selected assigned parameter. See “Remote Override mapping”.
Clear All Remote Override Mappings for Device
This menu command is available when Remote Override Edit Mode has been activated on the Options menu. It re-
moves all Remote Override mapping you have set up for the selected device. See “Remote Override mapping”.