Operation Manual

MENU AND DIALOG REFERENCE
750
Reload Samples
This menu item is used with the NN-XT sampler. When you select this, any changes you have made on a loaded sam-
ple using the sample parameters (root key, loop settings, etc.) are immediately undone, and the settings revert back
to the original.
Add Zone
This menu item is used with the NN-XT sampler. It is used for adding an empty zone to the key map. An empty zone
can be resized, moved and edited in the same way as zones that contain samples.
An empty zone is indicated with the text “**No Sample**”. After you have added an empty zone, you can assign a sam-
ple to it.
Copy Zones
This menu item is used with the NN-XT sampler. It copies the selected zone(s), and all of its settings - including ref-
erences to any sample it may contain - and places it in the clipboard buffer. You can then select “Paste Zones” to cre-
ate a new zone that is an exact replica of the copied zone(s). Note that copying/pasting zones can also be performed
between separate NN-XT devices.
Paste Zones
This menu item is used with the NN-XT sampler. If you have used the “Copy Zones” command, with any number of
selected zones, you can create exact duplicates of these by using the “Paste Zones” command. The pasted zones will
then be added below any existing zones in the key map.
Duplicate Zones
This menu item is used with the NN-XT sampler. It lets you duplicate any number of already existing zones (contain-
ing samples or empty).
1. Select the zone(s) you want to copy.
2. Select “Duplicate Zones”.
The selected zones will now be copied and automatically inserted below the last one in the key map display.
The duplicated zones will contain references to the same samples as the original zones. They will also have the exact
same key ranges and parameter settings.
Delete Zones
This menu item is used with the NN-XT sampler. Selecting this option will remove both the selected zones, and any
samples they may contain.
Select All Zones
This menu item is used with the NN-XT sampler. This option will automatically select all zones in a key map.
Copy Parameters to Selected Zones
This menu item is used with the NN-XT sampler. It lets you easily copy parameter settings from one zone to any num-
ber of other zones. Proceed as follows:
1. Select all the zones you want to involve in the operation.
By this we mean the zone with the settings you wish to copy, and the zone(s) to which you want to copy the set-
tings.