Operation Manual

MENU AND DIALOG REFERENCE
746
Sort Selected Device Groups
This function should be used if you want to rearrange devices or sequencer tracks according to the order of the cur-
rent selection. For example, if you want to rearrange the rack devices according to the current sequencer track order,
you can select all sequencer tracks and then choose “Sort Selected Device Groups” to rearrange the rack devices.
See “About the “Sort Selected Device Groups” function” for more examples.
Auto-route Device
Auto-routing is when devices’ audio and CV/gate connections are automatically routed according to default rules.
Auto-routing is normally performed when:
• A new device is created.
• Moving, duplicating or pasting devices with [Shift] pressed.
However, if a device is already in the rack, you can “force” it to be auto-routed by selecting it and then select this
menu item.
For more information about auto-routing rules, see “Automatic routing”.
Disconnect Device
This disconnects all audio and CV/gate connections from the selected device(s).
Combine/Uncombine
D By selecting several devices in the rack and selecting “Combine”, a Combinator device will be created contain-
ing the selected devices.
D By selecting the Combinator (or one or several devices contained in a Combinator) and then selecting “Un-
combine” will remove the devices from the Combinator and into the rack.
In case the whole Combinator is selected, this will be removed and the devices it contains will be moved into the
rack.
See “The Combinator” for more details.
Initialize Patch
Sometimes it is useful to start with a “clean slate” when creating a synth sound, a drum kit or a sampler patch. This is
done by selecting Initialize Patch from the device context menu or Edit menu. This sets all parameters to “standard”
values. Initializing NN-19, NN-XT, Dr. Octo Rex, Redrum or Kong devices will also remove samples from the device,
allowing you to start from scratch.
Cut Pattern
Moves the current pattern in the selected Redrum or Matrix to the clipboard. The pattern is then cleared.
Copy Pattern
Copies the current pattern in the selected Redrum or Matrix to the clipboard.
Paste Pattern
Copies the pattern on the clipboard to the current pattern location in the selected Redrum or Matrix device. This over-
writes the current pattern with the one on the clipboard. Note that this can be used to transfer patterns between dif-
ferent Reason songs.