Operation Manual

MENU AND DIALOG REFERENCE
745
• If you copy and paste several devices, the connections between these are preserved.
D If you hold down [Shift] when you paste a device, Reason will attempt to auto-route it.
For example, [Shift]-pasting an instrument device typically connects it to the first free mixer input(s) above it in the
rack.
D You can also paste the device(s) and track(s) into another song, including all sequencer data and device set-
tings.
• When you paste sequencer clips, they appear at the song position, on their original track(s).
If you have deleted the original tracks, or if you paste into another Reason song document, the clip will be pasted
at the song position on the selected track (if the track type is the same as the original). Otherwise new tracks will
be created. If the clip is a note clip, a new Combinator track will be created.
• Notes or automation points will be pasted at the song position on the selected track (if the track types are
compatible).
• Individual Kong Drum patches can be copied and pasted from one selected pad to another.
Delete/Delete Tracks and Devices
This menu item is used for deleting selected items. If you delete a sequencer track with this menu item (then called
“Delete Tracks and Devices”), its device is also deleted.
! If “Auto-group Devices and Tracks” is selected in the Options menu, an alert appears asking you if you want to
delete only the selected device or the entire Device Group - see “About Device Groups”.
Delete Tracks
This deletes the currently selected sequencer track(s) without removing the corresponding rack device(s).
Duplicate Tracks and Devices
This creates a duplicate of the selected device and track, complete with all parameters and recordings/events. The
duplicated items will appear below the selected device and track, respectively.
! If “Auto-group Devices and Tracks” is selected in the Options menu, all devices in the Device Group will be du-
plicated - see “About Device Groups”.
Select All/Select All Devices
This selects all devices in the rack, all tracks in the track list or all clips or all notes or automation points in an open
clip. The result depends on which area (rack, track list, etc.) has focus. This is indicated by a thin frame around an
area in the document window.
D To set focus to the desired area, click somewhere in it.
You can use this menu item to quickly apply a command to all items you are working on, for example deleting all de-
vices in the rack (select Select All Devices and then press [Delete]) or for Quantizing all notes in an open clip (select
Select All and then click the Quantize button in the Tool window).
Select All in Device Group
This will select all devices within the selected device’s Device Group. See “About selecting all devices in a Device
Group”.