Operation Manual

SEQUENCER FUNCTIONS
64
In Edit Mode, you get a close-up look at the recordings on a track. In Edit Mode, the Edit Pane can be divided into
several horizontal edit rows, showing different types of events (notes, velocity, parameter automation, etc.). This is the
view mode of choice for fine editing the content of your recorded clips, and for drawing notes, performance control-
lers and other events manually.
Toolbar overview
The sequencer Toolbar features various sequencer editing tools as well as the Snap function. The tools can be used
in both Edit Mode and the Song/Block Views, with slightly different purposes in the respective modes. See “Toolbar
details” for details about each tool.
Track List overview
To the left in the sequencer, all tracks are listed in the Track List. Each track in the sequencer is associated with a
specific device in the rack. By clicking on a device icon in the Track List you automatically set Master Keyboard Input
(see “Setting Master Keyboard Input”) to the corresponding device in the rack for playing and/or recording.
Tracks overview
Most rack devices in a song automatically get their own dedicated track in the sequencer when you create the device.
Each track can feature one or several lanes on which note, performance controller, pattern and parameter automation
events can be recorded - in clips. See “Track details” for more details about tracks.
! If the Blocks button on the Transport Panel is on, the Blocks Track is also shown at the top in the Track List.
Tracks