Operation Manual

REDRUM DRUM COMPUTER
585
• The notes will have the pitch of the corresponding drum sound (see “Using Redrum as a sound module”) and
the velocity depending on the “Dynamic” parameter value in the device.
“Soft” notes get velocity 30, “Medium” notes get velocity 80 and “Hard” notes get velocity 127.
• You probably want to turn off the “Enable Pattern Section” switch on the Redrum device panel.
Otherwise, the drum sounds will be double-triggered during playback (by the pattern section itself, and by the ren-
dered notes on the sequencer track).
The “Convert Pattern Automation to Notes” function
If you have recorded or drawn pattern changes on a Redrum track, you can have the whole track converted to notes,
in the following way:
1. Select the track with the pattern automation.
2. Select “Convert Pattern Automation to Notes” from the Edit menu or the context menu for the track.
For each pattern clip, the corresponding pattern is converted to note clips on the track (following the same rules as
for the “Copy Pattern to Track” function). The track will play back just the same as when you played the pattern de-
vice with the pattern changes.
D After the operation, the Pattern Select lane is switched off.
The “Enable Pattern Section” button on the device is automatically turned off.