Operation Manual

COMMON OPERATIONS AND CONCEPTS
34
Editing parameters
Since a large part of Reason is laid out like “real” hardware devices, such as instrument and effect devices etc., al-
most all controls are designed like their real world counterparts - mixer faders, effect unit knobs, transport buttons,
etc. How to adjust these controls is described in the following paragraphs.
Knobs
D To “turn” a knob, point at it, hold down the mouse button and drag up or down (as if the knob was a vertical
slider).
Dragging upwards turns the knob clockwise and vice versa.
D If you press [Shift] and drag, the knob will turn slower, allowing for higher precision.
You can also adjust the knob precision with the “Mouse Knob Range” setting on the General page in Preferences.
This dialog is opened from the Edit menu (or from the Reason menu if you are running Mac OS X).
D To reset a knob to its default value (usually zero, center pan or similar), press [Ctrl](Win) or [Cmd](Mac) and
click on the knob.
Faders and sliders
D To move a fader or slider, click on the handle and drag in the fader/slider direction.
D You can also click anywhere on the fader/slider to instantly move the handle to that position.
D If you press [Shift] and drag, the fader/slider will move more slowly, allowing for higher precision.
D To reset a fader/slider to its default value (usually zero, 100, center pan or similar), press [Ctrl](Win) or
[Cmd](Mac) and click on the fader/slider handle.