Operation Manual

SAMPLING
266
3. Start playing or singing what you want to sample.
As soon as any audio is present on the Sampling Inputs on the Hardware Interface, the waveform display will indi-
cate this by drawing a wave.
! The buffer size for sampled audio is 30 seconds. After 30 seconds, the play head will start over again from the
beginning and start erasing any previously sampled audio.
D If you want to restart the sampling manually, click the Restart Sampling button:
The “Restart Sampling” button
This will erase any sampled audio and force the play head to restart from the beginning.
! Note that you cannot restart sampling this way if you use the “click and hold” sampling method.
4. When you’re satisfied with your recording, click the Stop Sampling button in the waveform display.
The “Stop Sampling” button
The waveform display closes and the sample automatically ends up in the device, where you can play it back instantly:
By default, the sample is named “Sample ‘n’” where ‘n’ is a serial number. As you will notice, any silence preceding the
actual audio in the sample will be automatically disregarded. The entire sample is preserved, but this is done so you
won’t have to edit the sample start before playback.