Operation Manual

WORKING WITH THE RACK
203
Creating devices
Devices can be created in a number of different ways. These first two methods apply to any device types:
D Use drag and drop, or double-click on a device on the “Device Palette” tab in the Tool Window.
Alternatively, select a device and click the “Create” button. Any device type can be created.
The Device Palette tab in the Tool Window.
D Select desired device from the “Create” menu.
Any device type can be created. The “Create” menu is available both on the main menu and on the rack and device
context menus.
Depending on what type of device you’ve created, and also the “Auto-Group Devices and Tracks” setting, the results
will differ:
• If “Auto-Group Devices and Tracks” on the Options menu is not selected, the new device is added directly be-
low the currently selected device in the rack.
If no device is selected, the new device is added at the bottom of the rack.
• If “Auto-Group Devices and Tracks” on the Options menu is selected, devices will not be created in the middle
of existing Device Groups (except if they are effect devices - see “Effect devices specifics”).
This means a device might not end up below the selected device in the rack, but below that device's Device Group.
• When you add a new device, Reason attempts to automatically route it in a logical way.
For more information about the auto-routing features, see “Automatic routing”.
! See below for information specific to certain device types.