Getting Started Guide

TUTORIAL 1 - PLAYING A SONG
46
13. Raise the Aux send level knobs at the top of a mixer channel.
Send 1 is connected to the delay, while send 2 goes to the chorus/flanger.
The Aux sends.
Now, let’s try tweaking some controls on an actual instrument device, to change the sound. In this example
we will use the Subtractor synthesizer device, but all devices have parameters that can be adjusted on the
device panels in the same way.
Unless you have a very large screen, the Subtractor device isn’t visible right now. You could use the scroll-
bar to scroll the rack down, but here’s a quicker way:
14. In the sequencer area (above the transport panel), click on the name “Subtractor” in the
track list to the left.
The rack is automatically scrolled to bring the Subtractor device into view.
15. Try adjusting some parameters while the song is playing.
You may for example want to tweak the “Filter 1 Freq” slider, to change the brightness of the synth
bass sound.
That concludes the first tutorial.