Getting Started Guide

TUTORIAL 5 - ADDING A REX LOOP
68
Adjusting Dr. Rex parameters
You can tweak the loop in various ways using the Dr. Rex parameters. Here follows a few examples:
D While playing back the loop, try adjusting the Filter Frequency parameter.
By lowering the frequency the loop is shaped through a low pass filter (by default). Raising the filter
resonance (Res) slider will produce a sharper filter sound.
D By using the Transpose parameter you can transpose the whole loop up or down one oc-
tave (in semitone steps).
D If you adjust the “Slice” knob you can select an individual slice for editing.
A selected slice is highlighted in the display. The four knobs to the right of the Slice button (Pitch/
Pan/Level/Decay) can be used to edit a single slice. E.g. by adjusting the Pitch parameter the se-
lected (highlighted) slice will be transposed but not the other slices.
That concludes the fifth tutorial. You can either keep things as they are and directly go on to the next tu-
torial, or save the song to enable you to continue later.