Operation Manual
Table Of Contents
- Table of Contents
- The Sequencer
- Routing Audio and CV
- Remote - Playing and controlling Reason devices
- Using Reason as a ReWire Slave
- Advanced MIDI - the External Control Bus inputs
- Synchronization
- Optimizing Performance
- Transport Panel
- Reason Hardware Interface
- The Combinator
- The Mixer
- The Line Mixer 6:2
- Redrum
- Subtractor Synthesizer
- Malström Synthesizer
- NN-19 Sampler
- NN-XT Sampler
- Introduction
- Panel Overview
- Loading Complete Patches and REX Files
- Using the Main Panel
- Overview of the Remote Editor panel
- About Samples and Zones
- Selections and Edit Focus
- Adjusting Parameters
- Managing Zones and Samples
- Working with Grouping
- Working with Key Ranges
- Setting Root Notes and Tuning
- Using Automap
- Layered, Crossfaded and Velocity Switched Sounds
- Using Alternate
- Sample Parameters
- Group Parameters
- Synth parameters
- Connections
- Dr. Rex Loop Player
- Matrix Pattern Sequencer
- ReBirth Input Machine
- BV512 Vocoder
- The Effect Devices
- Common Device Features
- The MClass effects
- The MClass Equalizer
- The MClass Stereo Imager
- The MClass Compressor
- The MClass Maximizer
- Scream 4 Sound Destruction Unit
- RV7000 Advanced Reverb
- RV-7 Digital Reverb
- DDL-1 Digital Delay Line
- D-11 Foldback Distortion
- ECF-42 Envelope Controlled Filter
- CF-101 Chorus/Flanger
- PH-90 Phaser
- UN-16 Unison
- COMP-01 Auto Make-up Gain Compressor
- PEQ-2 Two Band Parametric EQ
- Spider Audio Merger & Splitter
- Spider CV Merger & Splitter
- Menu and Dialog Reference
- About Audio on Computers
- MIDI Implementation
- Index
ROUTING AUDIO AND CV
35
Color Coding
Cables are color coded in the following way, making it easier to discern between
the various connections:
• Audio connections are different shades of red.
• CV connections are different shades of yellow.
• Connections to and from Effects devices are different shades of green.
Automatic Routing
Auto-routing is when devices are automatically routed according to default rules.
Auto-routing is performed in the following circumstances:
• When a new device is created.
• When moving, duplicating or pasting devices with [Shift] pressed.
Automatic Routing Rules
Reason Mixer devices
D The first created mixer device will be routed to the first available in-
put pair in the Hardware Device.
Routing devices to the Mixer
D When an Instrument Device is created, it is auto-routed to the first
available mixer channel(s).
Adding an effect to the Mixer
D When you have a mixer selected and create an effect device, it will
be connected as a send effect (to the first free Aux Send/Return).
Examples of effects that lend themselves well for use as send effects are re-
verb and delay.
D If there are no free Aux Sends on the mixer, the effect will be routed
as an insert effect, after the mixer.
That is, the master output signal from the mixer will be routed through the ef-
fect.
Adding an effect directly to a device (Insert)
D When you have an instrument device selected and create an effect,
that effect will be connected as an insert effect. That is, the signal
from the device will pass through that effect and to the mixer (or to
another effect).
Adding an effect between the Mixer and the hardware
interface.
D If you select the hardware interface at the top of the rack and add
an effect device, it will be routed as an insert effect between the
main mixer and the hardware interface.
This is where you typically would add an MClass Mastering Suite Combi.
These cables are green, indicating effect device connections.
This cable is yellow, indicating a
CV connection.
These cables are red, indicating connections
between instruments and mixer devices.