Operation Manual
Table Of Contents
- Table of Contents
- The Sequencer
- Routing Audio and CV
- Remote - Playing and controlling Reason devices
- Using Reason as a ReWire Slave
- Advanced MIDI - the External Control Bus inputs
- Synchronization
- Optimizing Performance
- Transport Panel
- Reason Hardware Interface
- The Combinator
- The Mixer
- The Line Mixer 6:2
- Redrum
- Subtractor Synthesizer
- Malström Synthesizer
- NN-19 Sampler
- NN-XT Sampler
- Introduction
- Panel Overview
- Loading Complete Patches and REX Files
- Using the Main Panel
- Overview of the Remote Editor panel
- About Samples and Zones
- Selections and Edit Focus
- Adjusting Parameters
- Managing Zones and Samples
- Working with Grouping
- Working with Key Ranges
- Setting Root Notes and Tuning
- Using Automap
- Layered, Crossfaded and Velocity Switched Sounds
- Using Alternate
- Sample Parameters
- Group Parameters
- Synth parameters
- Connections
- Dr. Rex Loop Player
- Matrix Pattern Sequencer
- ReBirth Input Machine
- BV512 Vocoder
- The Effect Devices
- Common Device Features
- The MClass effects
- The MClass Equalizer
- The MClass Stereo Imager
- The MClass Compressor
- The MClass Maximizer
- Scream 4 Sound Destruction Unit
- RV7000 Advanced Reverb
- RV-7 Digital Reverb
- DDL-1 Digital Delay Line
- D-11 Foldback Distortion
- ECF-42 Envelope Controlled Filter
- CF-101 Chorus/Flanger
- PH-90 Phaser
- UN-16 Unison
- COMP-01 Auto Make-up Gain Compressor
- PEQ-2 Two Band Parametric EQ
- Spider Audio Merger & Splitter
- Spider CV Merger & Splitter
- Menu and Dialog Reference
- About Audio on Computers
- MIDI Implementation
- Index
REBIRTH INPUT MACHINE
205
Routing
When the two programs are synced, you can route any of the eighteen available out-
puts in ReBirth, to separate channels in a Reason Mixer, or to the Hardware Interface
for direct connection to a physical output on your audio card.
If you flip the rack around, a row of 18 audio outputs is shown, with the L/R Mix out-
puts auto-routed to your mixer or to the hardware interface.
What Signals are on the Outputs?
Mix-L and Mix-R
This is the regular master output in ReBirth RB-338. These are the only stereo chan-
nels, all other channels are in mono.
D If none of the other channels are used, then this carries all the sound
from ReBirth.
D Signals that are activated separately are removed from this mix.
If for example the 909-Mix channel is activated, then Mix-L and Mix-R carries all the
sound from ReBirth RB-338 except the 909, which will appear on its own channel.
The individual outputs are described more closely in the ReWire chapter of the Re-
Birth manual.