User Manual

AUDIOMATIC RETRO TRANSFORMER
993
Volume
D Set the output volume with the Volume knob.
Range: - INF to + 12 dB.
q Use the Volume knob in combination with the “Gain” knob, to compensate for high input Gain settings.
Connections
CV Modulation In
Transform
A bipolar CV signal patched here modulates the Transform parameter (see “Transform”). A positive signal increases
the Transform parameter amount and a negative signal decreases it.
q Patch an LFO signal here and use with the PVC Preset, for a nice sweeping sound!
! Note that the default Transform parameter range can not be exceeded.
Dry-Wet
A bipolar CV signal patched here modulates the Dry/Wet front panel control (see “Dry/Wet”). Zero modulation
means that the current Dry/Wet knob setting is valid.
Input L&R
D Patch the audio signals you want to process here.
If your signal is in mono, connect only to the L (left) input.
Output L&R
These are the stereo audio outputs.
• The signal routing (stereo/mono/dual mono) is Preset dependent.