User Manual

THE ECHO
944
The Output section
This section is the final output stage where the processed effect signal goes through the standard Dry/Wet control,
as well as the optional Ducking control.
Dry/Wet
This is a traditional dry/wet parameter for controlling the relation between the unprocessed and the processed signal.
When Roll mode is enabled (see the Mode section for more info), we recommend that the Dry/Wet control is set to
Wet only even when The Echo is used as an insert effect.
Ducking
Ducking attenuates the level of the Wet (processed) signal until the amplitude of the Dry signal drops, at which time
the Wet signal is faded back in. This is useful for adding a delay effect to the silence that comes after you have
played your lovely lead line. The delay will not be heard while you are still playing so you will avoid muddling up the
solo.