User Manual

THE ECHO
942
The Color section
This section features a distortion/limiter and a resonant filter. Each echo repeat is colored before being fed back into
the loop, meaning that the distortion and filter effects will be more pronounced with each repeat.
Drive
This knob sets the amount of the selected distortion/limiter effect.
Type
The Type Switch lets you select between 4 different effect algorithms:
• LIM (Limiter)
This produces that typical “compression” effect which you would get from analog limiters.
• OVDR (Overdrive)
This produces an analog-type overdrive distortion effect.
• DIST (Distortion)
Similar to overdrive, but denser.
•TUBE
This emulates tube distortion.
Filter
This is a resonant bandpass filter, hence it lets you create filter effects where either the lower or the higher frequency
range is cut (or boosted, in case the Reso control has been turned up).
Freq
This control sets the change in frequency. For each delay repetition, the frequency content will shift in accordance
with the frequency setting.
Reso
This knob determines the amount of resonance on the delay repetitions. A different frequency range will be amplified
depending on the setting of the Freq parameter.