User Manual

SOFTUBE AMPS
886
Amp panel controls
Softube Amp
The panel controls are used for tweaking the sound. The following controls can be found in the Softube Amp:
Softube Bass Amp
The panel controls are used for tweaking the sound. The following controls can be found in the Softube Bass Amp:
|
Control
|
Description
Gate knob Here you can set a gate threshold for the Softube Amp. Signals below the set threshold are not let
through.
Boost switch This boosts the input gain, for more crunch.
Gain This controls the input gain. The higher the Gain value, the more crunch you get.
Bass/Mid/Treble controls These are tone controls which you can use to cut or boost the bass, midrange and high frequencies,
respectively.
Poweramp Gain This is the gain control for the modeled power amp.
Volume Controls the master volume of the Softube Amp.
|
Control
|
Description
Drive This controls the input gain. The higher the Drive value, the more crunch you get.
Bass/Middle/Mid Freq/Treble controls These are tone controls which you can use to control the bass, midrange and high frequencies, re-
spectively. The Bass and Treble controls also have Ultra Lo/Hi buttons for emphasizing the low and
hight frequency ranges even further.
There is also a Mid Freq selector where you can select different Mid Frequency EQ characteristics.
Volume Controls the master volume of the Softube Bass Amp.