User Manual

KONG DRUM DESIGNER
836
The Drum modules
! Note that only four pre-defined parameters per Drum Module can be automated!
NN-Nano Sampler
The NN-Nano Sampler is based on the NN-XT Sampler and was designed to be ideal for drums and percussion
sounds.
The NN-Nano can handle samples or sets of samples for each of the four different Hit Types described in “Assigning
Hit Type to Pads”. Each Hit Type can contain one or several samples which can be layered and/or altered and con-
trolled individually via velocity.
Loading samples
1. Select the Hit you want to load the sample(s) into by clicking in the display.
2. Click the Browse Samples (folder) button and select one or several WAV, AIFF or SoundFont Samples or REX
slice files.
3. Click the Load button in the Browser.
The sample(s) are loaded in the selected Hit.
D Alternatively, drag a sample, a REX slice or a SoundFont file from the Browser and drop on the NN-Nano panel.
The NN-Nano panel is dimmed in blue and a Sample Replace symbol appears in the center.
If you selected several samples in the Browser, these will be loaded as separate Layers in the selected Hit.
If you like you can load additional samples, either into another Hit or into a new Layer in the same Hit. To load a new
sample in a new Layer in the same Hit, proceed as follows: