User Manual

KONG DRUM DESIGNER
834
Loading and Saving Drum Patches
Loading and Saving Kong Drum patches (“.drum”) are done in the same way as with any other Reason device - see
“Creating a new Kit Patch”, “Loading patches” and “Saving patches”.
A Kong Drum patch contains all parameter settings on the Drum Control Panel, including modules and parameter
settings in the Drums and FX section - with references to any used samples.
It’s also possible to load samples and REX loops in the Drum Control Panel section. Loading a sample will automati-
cally open it in an NN-Nano Sampler module (see “NN-Nano Sampler”) and loading a REX file will automatically open
it in a Nurse Rex Loop Player module (see “Nurse Rex Loop Player”).
Sampling in Kong
The sampling procedure is the same for all devices that can sample (Kong, NN-19, NN-XT and Redrum). The sam-
pling and sample editing procedures are described in detail in the “Sampling” chapter.
D To sample your own sound and automatically load it into an NN-Nano Sampler module in the Drum and FX
section, click the Sample button for the desired Drum channel.
Refer to the “Sampling” chapter for details on how to set up and use the sampling feature.
The Drum Module slot
Each Drum channel in Kong has a main module slot - the Drum Module slot - to which you can load one of 9 different
types of drum sound modules for designing drum sounds.