User Manual

KONG DRUM DESIGNER
824
2. Click the folder button on the Drum Control Panel.
D Alternatively, right-click (Win) or [Ctrl]-click (Mac) on the Pad and select “Browse Drum Patches...” from the
context menu.
The Patch Browser opens.
3. Locate and open a Kong Drum Patch (extension ‘.drum’) or a sample or REX file.
You will find a selection of Kong Drum Patches in the Factory Sound Bank (in the Kong Drum Patches folder).
Loading a sample will automatically open it in an NN-Nano Sampler module (see “NN-Nano Sampler”) and loading
a REX file will automatically open it in a Nurse Rex Loop Player module (see “Nurse Rex Loop Player”).
You can also sample your own sound into a Drum, see “Sampling in Kong”.
D Alternatively, drag a Kong Drum Patch file, a REX file, a sample or a REX slice from the Browser and drop on
the Drum Control Panel - or on any desired drum pad.
Depending on if you drop a Drum Patch file, a REX file or a sample/REX slice, the Drum Control Panel or pad is
dimmed in orange or blue and a Patch/Sample Replace symbol appears in the center.
! It is important that you drop REX files either on the Drum Control Panel or on a pad. Dropping it elsewhere will
replace the entire Kong device with a Dr. Octo Rex device and load the REX file in this device instead!
4. Change some parameter settings for the drum sound channel using the knobs on the Drum Control Panel.
These parameters are described in “The Drum Control Panel”. Note that the Drum Control Panel parameters are
“global” for each Drum channel. Each drum sound can consist of a number of different sound and FX modules,
each with their separate set of parameters. Refer to “The Drum modules”, “The Support Generator modules” and
“The FX modules” for details about all the modules that can be used to build up a complete Drum sound.
5. Repeat steps 1 and 4 for the other drum sound channels.
6. When you’re satisfied with the drum kit, you can save the patch by clicking the Floppy Disk button in the patch
section on the Drum panel.
Note however, that you don’t necessarily need to save the Drum patch - all settings are included when you save a
Kong Kit Patch (see “Saving Kit Patches”) and/or your song.
Creating an empty Kit Patch
To “initialize” the settings in the Kong, select “Reset Device” from the Edit menu or the device context menu. This re-
moves all samples for all drum sound channels, and sets all parameters to their default values.
Saving Kit Patches
Saving patches is done in the same way as with any other Reason device - see “Loading patches” and “Saving
patches”.
! Note that you don't have to save any of the 16 individual Drum patches first if you don’t want to - all settings for
each individual Drum patch are included in the Kong Kit patch.