User Manual

MALSTRÖM SYNTHESIZER
689
Routing
The Malström puts you in total control of how the signal should be routed from the oscillators, through the filters and
on to the outputs. Below is first a general description of the routing options, followed by examples of how to route the
signal in order to achieve a certain result.
D Click on a button so that it is lit, to route the signal correspondingly.
See below for descriptions.
! Note that the result depends both on the routing buttons and on whether the filters and shaper are activated or
not!
If this button is lit, the signal from osc:B is
routed to filter:B. If this is not lit, the signal
from osc:B will go straight to the outputs.
If this button is lit, the signal from filter:B is routed to filter:A via the shaper. The signal
from filter:B can originate from either osc:A, osc:B or both. If this is not lit, the signal from
filter:B will go straight to the outputs.
If this button is lit, the signal from osc:A is
routed to filter:B. If neither this nor the other
routing button from osc:A (to filter:A/shaper)
is lit, the signal from osc:A will go straight to
the outputs.
If this button is lit, the signal from osc:A is routed to filter:A via the shaper. If neither this nor the other
routing button from osc:A (to filter:B) is lit, the signal will go straight to the outputs.