User Manual

HARDWARE INTERFACE
570
Advanced MIDI Device
This is opened by clicking the “ADVANCED MIDI” button on the Hardware Interface panel. The Advanced MIDI de-
vice is only used if you are controlling Reason from an external sequencer, using the External Control Bus inputs.
Normally, you send MIDI to a track via the sequencer, by selecting the sequencer track.
You can select MIDI ports for up to four External Control Busses (on the Sync page in Preferences). Each bus can
host 16 MIDI channels, for a total of up to 64 MIDI input channels. The Advanced MIDI Device is where you can route
each MIDI channel to a specific device in the Reason rack:
1. Select one of the External Control Busses by clicking the corresponding Bus Select button at the top of the Ad-
vanced MIDI device.
2. Pull down the device pop-up menu for a MIDI channel and select a device.
The menu lists all devices in the current song.
Now, incoming MIDI data on the selected bus and MIDI channel is sent directly to the selected device, bypassing the
Reason sequencer. The name of the device is shown in the name field for that MIDI particular channel.
3. Try sending MIDI notes from the external sequencer, on the selected bus and MIDI channel.
The indicator below the channel's name field should light up.
See also “Advanced MIDI - The External Control Bus inputs” in the Advanced MIDI and Synchronization chapter.
More Audio
Reason supports up to 64 audio input and 64 audio output channels. The additional 48 inputs and 48 outputs can be
found on the “More Audio” panel.
D To view inputs 17-64 and outputs 17-64, click the “More Audio” button.
Each additional input and output features a meter and a multi-color LED indicator which will be lit in different colors
depending on current state - see “Introduction”.