User Manual

COMMON OPERATIONS AND CONCEPTS
57
Main Mixer channel strip context menu
If you click anywhere on a channel strip in the Main Mixer (but not on a parameter or display), the context menu will
contain the following items:
The Channel Strip context menu.
• Cut, Copy, Paste, Delete and Duplicate Channels and Track items, allowing you to rearrange and manage the
channel strips in the Main Mixer.
• Commands for managing Device Groups.
• The “Create Send FX” lets you browse for an effects device, or Effect Combi patch, to connect and use as a
send effect.
The send effect will be automatically connected to the first available Send FX connectors of the Master Section
device in the Rack.
• A duplicate of the Create menu, allowing you to create new devices.
• “Route to” lets you create and connect to an Output Bus for sub-mixing.
• “Create Parallel Channel lets you create and connect to an additional channel for parallel processing.
• The “Copy Channel Settings” item lets you copy groups of settings for the selected channel strip.
The groups that can be selected are: “Dynamics”, “Filters and EQ”, “Insert FX”, “FX Sends” and “All”.
• The “Paste Channel Settings” item appears if you have previously copied any channel settings and want to
paste these to the selected channel strip.
• The “Browse Insert FX Patches” lets you browse for, and load, Effect Combi patches to the Insert FX section.
• The “Clear Insert FX” lets you delete any Insert Effects devices used in the channel.
• The “Reset All Channel Settings” resets all channel strip parameters to their default values.
It also automatically removes any used Insert FX devices from the channel strip.
• The “Set Remote Base Channel” item lets you set the remote base channel to the selected channel strip.
This is useful when you remote control channel strips from a control surface via MIDI.