User Manual

COMMON OPERATIONS AND CONCEPTS
53
Numerical segment displays
In the numerical segment displays on the sequencer Transport Panel and in the sequencer Inspector, values can be
edited in a number of different ways. The editing principle is exactly the same for the Transport Panel and Inspector
displays, which is shown in the two examples below.
Transport Panel segment displays
The segment displays of the Transport Panel can be edited as shown in the following Tempo display examples. The
Tempo display segments show (from left to right) BPM and 1/1000 BPM:
The other segment displays on the Transport Panel can be edited in the same way as described above. Some dis-
plays also features up/down arrow buttons.
Click on the left display segment to select the “whole BPM” value. Then, either
click and drag up or down or use the mouse scroll wheel to change tempo in steps
of 1 BPM. You can also use the [Up]/[Down] arrow keys on the computer
keyboard to change the value.
Alternatively, type in the new tempo and press [Enter] on the computer keyboard.
You can also type in a number preceded by [+] or [-] to add or subtract the
number from the current tempo value. Then, press [Enter] on the computer
keyboard.
Click on the right display segment to select the “1/1000 BPM” value. Then, either
click and drag up or down or use the mouse scroll wheel to change tempo in steps
of 1/1000 BPM. You can also use the [Up]/[Down] arrow keys on the computer
keyboard to change the value.
Alternatively, type in the new tempo and press [Enter] on the computer keyboard.
You can also type in a number preceded by [+] or [-] to add or subtract the
number from the current tempo value. Then, press [Enter] on the computer
keyboard.
Double-click on the display, type in the new tempo and press [Enter] on the
computer keyboard.