User Manual

COMMON OPERATIONS AND CONCEPTS
51
Fold/Unfold buttons
Fold/Unfold buttons are distinguished by a small triangle at the top to the left on a device. Clicking on a Fold/Unfold
button will unfold the device panel so that more controls are visible and can be accessed for editing on the screen.
On some devices, such as the RV7000 Advanced Reverb, there are more than one Fold/Unfold button. Clicking on
the second Fold/Unfold button on the unfolded front panel will open up the Remote Programmer panel from which
more parameters can be accessed:
The Fold/Unfold buttons on an RV7000 Advanced Reverb device.
Multi Mode selectors
Some parameters allow you to select one of several modes. There are two different graphical representations of this
in Reason.
The multi mode selector type below consists of a button with the different modes listed above it:
D Click the button to step through the modes or click directly on one of the modes printed on the panel, or click
on the corresponding LED, to select mode.
The currently selected mode is indicated by a lit LED.
The multi mode selector type below is a switch with more than two positions:
D To change mode, click and drag the switch, or click directly at the desired switch position (just as when adjust-
ing a slider).
Click on the Fold/
Unfold Button to
unfold the front panel.
Click on the second Fold/
Unfold Button on the
unfolded panel to bring up
the Remote Programmer.