User Manual

COMMON OPERATIONS AND CONCEPTS
47
Scrolling with the Hand tool
Scrolling with the Hand tool in the Rack.
In the Rack and Sequencer, you can also use the Hand tool for scrolling the view.
1. In the Rack, place the pointer on either of the wooden side panels of a rack column.
The pointer will switch to a hand symbol.
2. Click and drag the rack vertically and/or horizontally to scroll in the rack, as shown in the picture above.
If you are using only a single rack column, it’s only possible to scroll vertically.
In the Sequencer you have to manually switch to the Hand Tool by selecting it from the sequencer Toolbar. With the
Hand Tool selected, you can scroll in any direction on the Edit/Arrangement Pane. Refer to “Hand Tool” for more in-
formation.
Zooming in the Sequencer
In the Sequencer it’s possible to zoom in and out horizontally using the Song Navigator. You can also use the Magni-
fying Glass Tool on the Sequencer Toolbar to zoom vertically - see “Magnifying Glass Tool”. In addition to this, it’s also
possible to set a zoom level for the audio recordings inside the Audio Clips.
q See also “Scrolling and zooming using a wheel mouse”.
Zooming vertically in the Sequencer
D To zoom in vertically in the Sequencer arrangement, and thus increase the Track height, click on the “+” mag-
nification button at the bottom of the Track List:
Increase the Track height by clicking the + magnification button at the bottom of the Track List.
D To zoom out vertically, click on the “-” magnification button.
• When the Sequencer is in Edit Mode, individual vertical zoom controls become available.