User Manual

THE MAIN MIXER
456
6. Finally, select the Mix Channel device as Input on the Audio Track in the sequencer (or in the Audio Input se-
lector on the Audio Track device in the rack).
This will route the signal from the Mix Channel device’s output directly to the input of the Audio Track.
The Mix Channel device selected as audio input on the Audio Track in the sequencer.
Now, you can begin recording on the Audio Track according to the standard recording procedures described in
“General recording procedure”. The signal will be processed by the Insert FX of the Mix Channel device before be-
ing recorded on the track.
With this setup, you will always hear the sound of the input processed through the Amp device - just as if you had
a real hardware amp turned on and mic'ed in the studio. If you don't want the “Lead Gtr Rec Input” Mix channel to
be heard, just mute it in the Main Mixer.