User Manual

THE MAIN MIXER
442
5. Raise the Level fader on the “P1: Bus 1” channel to gradually introduce the heavily compressed sound (in par-
allel with the dry signal of the “Bus 1” channel).
Deleting Parallel Channels
D To delete a Parallel Channel, select its mixer channel strip - or its device in the rack - and press [Delete] or
[Backspace].
Confirm the deletion in the alert that appears.
Naming Parallel Channels
When you create a Parallel Channel it is automatically named after its source channel according to: “P1: <source
channel name>”, where “P” stands for Parallel and “1” for the first parallel channel. If you add on more parallel chan-
nels, the following channels are named “P2: <source channel name>” and so on.
If you change the name of the source channel, all the parallel channel are automatically renamed accordingly. You
can then manually rename each parallel channel afterwards if you like.
D To revert to the automatically generated name, double-click the parallel channel’s name, press [Delete] or
[Backspace] and then [Enter].